This repository was archived by the owner on Oct 11, 2026. It is now read-only.
Repository navigation
Communication Protocol
Ben Hutchison edited this page Aug 28, 2024
·
14 revisions
This page documents the communication protocol between an Anova Precision Cooker sous vide and a Bluetooth host like a phone or computer.
- Bluetooth Low Energy
- Device name:
Anova - Pairing code:
0000 - GATT (Generic Attribute Profile)
- Service:
0xffe0(UUID:{0000ffe0-0000-1000-8000-00805f9b34fb}) - Characteristic:
0xffe1(UUID:{0000ffe1-0000-1000-8000-00805f9b34fb}) - Request-response model
- Requests are fire-and-forget writes to the characteristic's value
- Responses are value change notifications from the characteristic
- There are no unprompted subscription callbacks, so each value you want to monitor in an ongoing fashion must be repeatedly polled in a loop
- Responses are not explicitly correlated to requests using a unique request ID or inline response, so concurrent requests must be sent in serial (must not overlap in time) instead of being sent in parallel, so you can tell which response goes to which request
- All values are transmitted as ASCII strings terminated with a carriage return (CR, \r,
0x0d)
The first line is the request, and the second line is an example response.
read unit
f
read set temp
145.0
Uses the unit returned by read unit.
set temp 135
Uses the unit returned by read unit.
135.0
read temp
73.4
Uses the unit returned by read unit.
status
stopped
π Need to investigate: what is the response message when the device is running?
start
start
π Need to investigate: what is the command to stop the device, and what is the response?
set timer 10
The argument is the number of minutes.
10
start time
π Want to confirm: there doesn't seem to be a response to this request, unlike every other request, which seems strange.
stop time
stop time