Skip to content

Scribble strips

Ben Hutchison edited this page Sep 14, 2026 · 7 revisions

Scribble strips are the LCD screens at the top of each channel column on the X-Touch Extender. They are so named because they are digital replacements for putting a strip of tape on your analog mixer and scribbling the channel name on them with a marker.

The scribble strip functionality depends on the MIDI control mode that the device is configured to use.

Ctrl and CtrlRel MIDI control modes
The eight X-Touch Extender scribble strips can each show two lines of seven characters each. The background color can be black, red, green, yellow, blue, magenta, cyan, or white. The text color can be light or dark, with the negative space inverted, and can be set independently for both rows.
HUI MIDI control mode
The scribble strips are limited to 1 line of four characters each. The background color is always black and the text color is always light.

This documentation describes the Ctrl and CtrlRel modes because the scribble strips are more fully-featured than HUI mode. To learn more about HUI mode, refer to my C# code and AgeMan's Mackie HUI Command Reference.

I recommend not using a black background, because even with light text, it's completely illegible and the LCD appears to be off or broken. Instead, to show white text on a black background, you should set the text color to Light and the background color to White.

Example

This Hello World example can be produced with either of the following two techniques.

Hello World

Library usage

To change the text and colors for a particular trackId (0-indexed), call IBehringerXTouchExtender<>.GetScribbleStrip(int trackId).

using BehringerXTouchExtender;

using var device = BehringerXTouchExtenderFactory.CreateWithRelativeMode();
device.Open();

var scribbleStrip = device.GetScribbleStrip(0);
scribbleStrip.TopText.Connect("Hello");
scribbleStrip.BottomText.Connect("World");
scribbleStrip.TopTextColor.Connect(ScribbleStripTextColor.Light);
scribbleStrip.BottomTextColor.Connect(ScribbleStripTextColor.Dark);
scribbleStrip.BackgroundColor.Connect(ScribbleStripBackgroundColor.Magenta);

Raw MIDI usage

The scribble strips are controlled programmatically using MIDI system exclusive (SysEx) messages.

If you aren't using this library, you can create and send the SysEx events yourself. Feel free to refer to my C# and Kotlin implementations if you want to see how this message can be constructed programmatically.

The message is always 23 bytes long, including the leading status byte and trailing end of message marker.

Byte extent Example value Description
0 f0 Normal SysEx status header
1–3 002032 Behringer manufacturer ID
4 15 Constant device ID, 0x15 for X-Touch Extender and 0x14 for X-Touch. Not 0x42 as documented!
5 4c Constant
6 00 Track ID in the range [0, 7], where track 0 is leftmost on the device and 7 is rightmost. Be aware that the printed legends on the device are 1-indexed, but this byte value is 0-indexed.
7 25

Bit-packed colors. Bits are of the form 0b00LU0BBB, where

  • L is the lower text color (0 = Light, 1 = Dark)
  • U is the upper text color (0 = Light, 1 = Dark)
  • BBB is the background color (0 = Black, 1 = Red, 2 = Green, 3 = Yellow, 4 = Blue, 5 = Magenta, 6 = Cyan, 7 = White) encoded as a big-endian integer

Bit-shifting pseudo-code:

(lowerColor << 5) | (upperColor << 4) | background

Example: dark lower text, light upper text, magenta background = 0b00100101 = 0x25

8–14 48656c6c6f2020

Top text, encoded in 7-bit ASCII. The length is always 7 characters/bytes, padded with spaces (0x20).

Example: Hello = 0x48 0x65 0x6c 0x6c 0x6f 0x20 0x20

15–21 576f726c642020

Bottom text, encoded in 7-bit ASCII. The length is always 7 characters/bytes, padded with spaces (0x20).

Example: World = 0x57 0x6f 0x72 0x6c 0x64 0x20 0x20

22 f7 End of message

The above example describes a SysEx message that turns the leftmost LCD magenta and says "Hello" with light text and "World" with dark text, as shown in the photo above. The resulting message is represented by the bytes

f0 00 20 32 15 4c 00 25 48 65 6c 6c 6f 20 20 57 6f 72 6c 64 20 20 f7

Note that some MIDI libraries may automatically add the header (0xf0) or end-of-message (0xf7) bytes for you, so you may need to exclude them from your payload, while others may not.

Clone this wiki locally