YOLO11改进 - 卷积Conv | StripBlockStripBlock大条带卷积块,通过顺序条带卷积捕获方向性长程依赖,强化高长宽比目标特征提取 | AAAI 2026

最新YOLOv11改进专栏
专栏收录该内容
¥39.90
¥99.00
242 篇文章

前言

本文介绍了面向高纵横比目标检测的条带卷积模块——StripBlock,适用于遥感、船只、车道等细长结构目标的特征增强。该方法先通过 5×5 深度卷积提取局部空间信息,再利用 1×19 与 19×1 的正交长条卷积分别建模横向和纵向长程依赖,最后通过 1×1 卷积生成空间注意力权重,并以逐元素门控方式重标定输入特征。我们将 StripBlock 成功集成进 YOLO11,在检测头的多尺度特征层中引入条带式空间建模能力,从而增强模型对细长目标和复杂遥感场景的定位与识别效果。

文章目录: YOLO11改进大全:卷积层、轻量化、注意力机制、损失函数、Backbone、SPPF、Neck、检测头全方位优化汇总

专栏链接: YOLO11改进专栏

介绍

YOLO训练调优与问题诊断实战,从损失震荡到mAP异常的全链路排查 本文系统梳理YOLO训练中的常见问题,构建从现象到根因的诊断框架,涵盖损失不降、mAP异常、震荡与NaN等典型故障。通过监控梯度范数、正样本分布、特征图等关键信号,结合控制变量法,精准定位数据标注、学习率、增强策略、优化器配置等问题。重点解析学习率调度、梯度裁剪、EMA、混合精度训练等调优技巧,提供可复用的排查checklist与PyTorch监控代码,助力实现高效、稳定的模型训练。 13 阅读·0 点赞·0 收藏 阅读详情

相关推荐

YOLO26 边缘端部署实战(四):树莓派/Jetson 落地全流程——模型瘦身、功耗与延迟平衡【剪枝、蒸馏、INT8、ONNX Runtime、DLA】

本文系统阐述YOLOv26边缘端部署全流程,针对树莓派/Jetson等低算力设备,提出“算力摸底→模型瘦身(剪枝/蒸馏/换小模型)→引擎选型→功耗延迟调优”四步方案。通过实测对比,结合剪枝、知识蒸馏与INT8量化,实现模型体积压缩50%以上,FPS提升至30+,功耗控制在15W内,附完整源码与速查表,助力工业检测模型高效落地。

王大师企业官方博客 1420

腾讯云CodeBuddy+微信小程序:5分钟开发番茄小闹钟

番茄钟是一种简单的时间管理方法。这个方法很简单:你专注工作25分钟,然后休息5分钟。这样可以让你更专心,不容易分心,还能防止过度疲劳。 很多人用番茄钟来提高工作效率,因为它能帮助你更好地管理时间。不过,市面上的一些免费番茄钟应用常常会有广告弹出来,影响使用体验。这就是为什么我们要开发一个没有广告的番茄钟小程序,让用户可以专心工作,不被打扰。

2201_75366661的博客 1690

保姆级教程:用Wokwi玩转ESP32 MicroPython仿真(含库文件配置指南)

本教程详细介绍了如何使用Wokwi平台进行ESP32 MicroPython仿真开发,包括库文件配置、传感器数据模拟和REPL调试技巧。通过Wokwi的仿真调试系统,开发者可以在浏览器中快速验证代码逻辑,提高开发效率,特别适合物联网项目的快速迭代。

weixin_29195615的博客 453

LMK04821时钟芯片SPI配置避坑指南:从寄存器读写到频率校准全流程

本文详细解析了LMK04821时钟芯片的SPI配置全流程,涵盖寄存器读写、频率校准及JESD204B系统设计中的关键技巧。通过实战案例和避坑指南,帮助工程师高效解决时钟输出异常、同步失败等常见问题,提升高速数据采集系统的时钟稳定性。

weixin_29172963的博客 162

LightGBM处理类别特征和缺失值有多省心?一个真实业务数据案例带你上手

本文通过真实电商数据案例,详细解析了LightGBM如何高效处理类别特征和缺失值。相比传统方法,LightGBM仅需一行代码即可自动处理高基数类别特征和缺失值,大幅提升模型训练效率和预测准确度,特别适合业务场景中的脏数据处理。

weixin_30689307的博客 461

Ubuntu22.04安装ROS1

代表使用 2 线程进行编译,可以根据 CPU 适当调整。如果出现小乌龟窗口,说明安装成功 🎉!启动成功,则打开另一个终端,测试。需要解决一些兼容性问题,因为。由于 Ubuntu 22.04。过程,确保成功安装。

asafriend的博客 4648

ESP32-C61 eFuse控制器深度解析:寄存器架构与安全烧写实践

eFuse(电子熔丝)是嵌入式芯片实现硬件级不可逆配置与信任根构建的核心物理机制,其本质是通过电学编程固化关键安全参数。原理上依赖熔丝单元的单向导通/断开特性,结合Reed-Solomon纠错、多级写保护和时序可控编程,保障数据在宽温域与工艺偏差下的高可靠性。技术价值在于为Secure Boot、Flash加密、密钥隔离等安全功能提供可信锚点,支撑从启动到运行的全链路防护。典型应用场景涵盖物联网设备量产烧录、安全启动使能、MAC地址固化及抗DPA密码运算配置。本文聚焦ESP32-C61平台,深入解析其eFu

weixin_42589700的博客 124

基于STM32+OneNet设计的物联网智慧路灯(100)

本次设计的智能路灯采用STM32芯片和OneNet物联网平台进行连接,开发出支持太阳能充电锂电池供电、GPS定位上传位置信息、手动/自动控制路灯开关、环境光照调节、红外传感器检测周围人员、空气质量监测等多项功能。同时,当路灯发生异常情况时,系统可以自动发送邮件或短信到指定邮箱或电话。

7731

CMake入门教程【基础篇】CMake+Visual Studio2022构建C++项目

CMake+Visual Studio2022搭建C++环境

小鱼酱的博客 4972

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

jre9下载 jdk9

(Java SE Runtime Environment 9.0) 9.0u175 官方最新版 【x86|x64】

lwip-2.0.3

lwip是瑞典计算机科学院(SICS)的Adam Dunkels 开发的一个小型开源的TCP/IP协议栈。实现的重点是在保持TCP协议主要功能的基础上减少对RAM 的占用。

假人有限元模型

假人模型,车辆碰撞假人有限元模型,适合做乘员安全的研究者利用

上一篇: YOLO26 改进 - 特征融合 | STFFM空间时间特征融合模块,强化时空互补、抑制噪声,助力小目标检测高效涨点
下一篇: YOLO26改进 - 卷积Conv | StripBlockStripBlock大条带卷积块,通过顺序条带卷积捕获方向性长程依赖,强化高长宽比目标特征提取 | AAAI 2026
魔改工程师
博客等级 码龄3年 2887粉丝 488原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

魔改工程师

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值