【FPGA】ILA错误:Make sure the clock connected to the debug hub (dbg_hub) core is a free running clock..

WARNING: [Labtools 27-3413] vivado报错调试界面无信号无波形解决方法 vivado----fpga硬件调试 (五) ----找不到ila核问题及解决,WARNING: [Labtools 27-3413] 阅读详情
AI摘要

博客围绕FPGA ILA错误展开,指出错误原因是ILA的debug hub时钟需连接常供时钟,若连接的时钟无时钟就会报错。解决方法一是确保所抓信号的时钟有提供,二是若有多个ILA且部分时钟无常供,可修改自动生成的约束选择常供时钟。

问题描述

1. Make sure the clock connected to the debug hub (dbg_hub) core is a free running clock and is active.
2. Make sure the BSCAN_SWITCH_USER_MASK device property in Vivado Hardware Manager reflects the user scan chain setting in the design and refresh the device.  To determine the user scan chain setting in the design, open the implemented design and use 'get_property C_USER_SCAN_CHAIN [get_debug_cores dbg_hub]'.
For more details on setting the scan chain property, consult the Vivado Debug and Programming User Guide (UG908).
WARNING: [Labtools 27-3413] Dropping logic core with cellname:'u_ila_0' at location 'uuid_23E7D65A79BC59F7BC47406C1714DFAE' from probes file, since it cannot be found on the programmed device.
WARNING: [Labtools 27-3413] Dropping logic core with cellname:'u_ila_1' at location 'uuid_3B505A030738513C98471D25F5B1F848' from probes file, since it cannot be found on the programmed device.
ERROR: [Labtoolstcl 44-513] HW Target
Vivado dubug core被删除解决方法(The debug hub core was not detected, Dropping logic with cellname:'xxx') 情景描述: 使用Vivado 2017.4书写Verilog代码,并且创建debug core进行信号抓取。添加完debug core并成功Run Implementaion,在IMPLEMENTATION的结构图中可以看到相应的ila_core和hub都已经建立。在生成bit文件的时候出现warning告知debug core被丢掉了,因为没有在设备上找到相应的内容,警告截图如下: 虽然bit... 阅读详情

相关推荐

Vivado ILA抓不到数据?从XDC约束到时钟树的完整避坑指南(含Xicom 50-38错误分析)

本文深入解析Vivado ILA调试中常见的'Xicom 50-38'等错误,提供从XDC约束到时钟树设计的完整避坑指南。涵盖调试时钟配置、触发机制优化、JTAG链路稳定性等关键环节,帮助开发者高效捕获Waveform data,解决ILA硬件调试中的典型问题。

r2s3t4的博客 332

【vivado使用】第6篇:报错:[Labtoolstcl 44-513] HW Target shutdown. Closing target: localhost......

vivado打开hardware manage -> open target后,突然对开发板进行断电,就会报错: 然后之后每次进行代码编译,综合,执行之后,就会提示error: 很明显就不是代码本身问题,要么不用管,要么关掉vivado,重新打开项目工程就行了。 ...

黑猫奥利奥的博客 3万+

Xilinx FPGA下载器驱动解决[Labtoolstcl 44-494]报错的问题

在设备管理器里删除原有驱动,然后安装这个驱动即可。

京东联盟h5st(3.1)加密参数逆向实战与反爬对抗策略

本文详细解析了京东联盟h5st(3.1)加密参数的逆向分析与实战破解过程。通过接口分析定位关键加密函数,拆解h5st结构并还原其基于SHA256和HMAC-SHA256的加密逻辑,最终使用Python集成JavaScript环境成功复现加密算法,并分享了应对反爬的频率限制、IP封禁及算法升级等对抗策略。

weixin_29246195的博客 1741

全网最详细Seurat v5 流程复现(拿来即用)

本文是基于seurat v5版本的教程复现,主要依据来源于官网seurat v5建议大家有时间的话可以去官网进行详细阅读学习!本节内容在之前seurat v4的教程都很多都有提到,文章所用到的数据及代码已经给各位放在这里了,有需要自取!请点击这里哦提取码:bui1。

ZxVSaccount的博客 1万+

【任何电机可使用的七段式s曲线-----包括matlab代码和simulink仿真】

S形加加速(T1)→>匀加速(T2)→减加速(T3)→>匀速(T4 )>加减速(T5)>匀减速(T6)-→>减减速(T7)

weixin_44312889的博客 6314

MDM主数据清洗和编码集成说明

绝大多数的企业业务系统是伴随业务发展而建设的,但随着业务发展单一系统难以支撑企业业务闭环。MDM主数据管理平台可以满足企业数据治理的需求,本文针对主数据清洗和编码集成进行梳理。...

数通畅联 3322

一文说清STM32CubeMX中文汉化全流程(图解说明)

详细讲解STM32CubeMX中文汉化的完整流程,通过图文并茂的方式手把手教学,解决界面英文带来的使用障碍,让开发更高效。掌握stm32cubemx中文汉化技巧,提升嵌入式开发体验。

weixin_42499004的博客 6293

Qt之自定义QToolTip,去掉显示动画和隐藏延时

先来看看Qt原生QToolTip的缺点:1.当提示内容无变化时,弹窗无法移动。只能先传个空字符串强制弹窗隐藏,然后在新位置再传个字符串。2.默认显示10多秒才消失,当然这个时间是可以设置的,但是如果我想一直显示呢?总不能设置一个超级大的时间吧。3.鼠标移出控件后(调用QToolTip::showText时传入了控件指针)默认300毫秒弹窗才隐藏。而且这个时间没法设置,如果想立即隐藏就没办法了。

草上爬的博客 4271

厉害了,华为推出下一代光传送网:fgOTN

2024年10月,在全球信息技术博览会(GITEX Global 2024)上,华为正式发布了其颠覆性的创新产品——端到端细粒度光传送网(fgOTN)解决方案。这一产品组合被誉为行业内首个fgOTN,旨在重塑光传送网络的格局,满足电力运输等行业日益增长的通信需求。在过去的近三十年中,同步数字体系(SDH)技术一直是电信和工业网络的支柱,因其可靠性、稳定性和低延迟而备受青睐。然而,随着数据需求的激增,SDH的最大带宽仅为10 Gbps,逐渐显露出局限性。

网络技术联盟站 637

Onnxruntime之YOLOP部署过程记录

魔改YoloP部署过程记录

如果想成为中心,那么就到中心去吧。 1932

怀旧版电脑GBC模拟器

再现原版GBC掌机的界面,电脑运行连游戏界面都一样大小,很怀旧,很真实,(英文版)强烈推荐,很小的文件,很难才找到的。

IEM模型,地表粗糙度模拟

利用微波反演土壤水分时候,利用IEM模型可以实现对随机地表的模拟

Statistics and Machine Learning Toolbox

Statistics and Machine Learning Toolbox(带书签),MATLAB统计学习工具

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

上一篇: 【FPGA】 [filemgmt 56-181]...The ‘xilinx.com:ip:clk_wiz:6.0‘ core does not support module reference.
下一篇: 【FPGA】 [BD 41-237] Bus Interface property FREQ_HZ does not match between xxxx and xxxx
funnydigitalworld
博客等级 码龄5年 57粉丝 16原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值