| 编号 |
类型 |
领域 |
问题 |
问题的数学分析及算法详细设计及数学表达式及方程式及多项式 |
数学特征 |
参数列表及参数的数值设计(含矩阵、队列、栈、树 、表、图、向量、其他) |
设计/制造/工艺/工程/工作流程完整实现步骤 |
典型应用场景列表及优点与局限与瓶颈及依赖条件 |
关联知识点连接点 |
|---|---|---|---|---|---|---|---|---|---|
| 1 |
负载均衡 |
网络/分布式系统 |
请求分发、会话保持、健康检查 |
加权轮询 (Weighted Round Robin): |
相关推荐
基于 nRF52840 与六轴 IMU 的跌倒检测告警器设计:姿态算法、误报抑制与 BLE 上报
三阶段判决 + 坐姿过滤 + 用户取消这三件事,比换多高级的算法都管用。误报率压下来,设备才有人愿意戴;有人戴,检出率才有意义。往上扩展可以加心率/血氧辅助判断、加 GPS 定位、加与社区护理系统的对接。但每加一个传感器,都要重新跑一遍误报测试——告警类产品,信任一旦失去很难重建。说明:代码为核心模块骨架,完整工程需补齐 IMU 驱动、BLE NUS 服务、按键消抖与 RTC;文中阈值为实测参考值,请按佩戴位置与目标人群重新整定。
C++ 极致工程美学:拆解 Meta Faiss 量化器的 AVX2 向量化与有偏收缩算法
在 Meta 向量检索库 Faiss 的头文件 内部,标量量化器为反量化系数预留了两个并列枚举:无偏(UNBIASED)与有偏(BIASED)。按照经典数理统计教材的直觉惯性,无偏估计一向被奉为无损推断的金科玉律;但在 100 万条 768 维真实特征向量的检索压测中,把缩放模式切到有偏估计后,重构均方误差(MSE)稳定下降 19.60%,P99 长尾失真压低 35.05%,最大极端离群误差更是被削减了 81.46%。向量检索面对的是单次离散几何判决,没有任何大数定律能抹平单次重构方差。本文聚焦 Fais
《数据结构》02-线性结构1 两个有序链表序列的合并
题目 本题要求实现一个函数,将两个链表表示的递增整数序列合并为一个非递减的整数序列。 函数接口定义: List Merge( List L1, List L2 ); 其中List结构定义如下: typedef struct Node *PtrToNode; struct Node { ElementType Data; /* 存储结点数据 */ PtrToNode Next;...
保姆级教程:用Qlib和LightGBM从零搭建你的第一个AI量化选股策略(附完整代码)
本文提供了一份详细的教程,教你如何使用Qlib和LightGBM从零搭建AI量化选股策略。教程涵盖了环境配置、数据获取、特征工程、模型训练和策略回测等关键步骤,并附有完整代码和常见问题解决方案,适合量化投资初学者快速上手。
PLC作为Modbus TCP客户端
PLC作为Modbus TCP客户端,Modbus Slave作为服务器
UE5 Metahuman与Blender手动绑定:ARKit面部动画实战对比
面部动画是角色动画领域的核心技术,其核心原理在于通过驱动面部骨骼或混合形状来模拟真实肌肉运动,从而赋予数字角色生命力。这项技术的价值在于极大地提升了虚拟角色的表现力与沉浸感,广泛应用于游戏开发、影视制作、虚拟现实和实时交互应用。在技术实现路径上,开发者常面临工业化集成方案与高度自定义方案的选择。本文聚焦于使用行业标准的ARKit 52个面部混合形状数据,深度对比了虚幻引擎Metahuman的工业化流程与Blender手动绑定方案在视觉保真度、工作流效率、性能开销和扩展性上的差异,为不同项目规模与技术需求的团
抖音用户主页视频数据爬虫详解(点赞,收藏,分享等)
的包中有个max_cursor参数,请求载荷中也有一个这样的参数,每次请求的数据中max_cursor是下一个请求的载荷,,,同时has_more为1时候代表还能请求,0为不能请求,我们做如下判断。最后发现cookie很容易过期,批量爬取有点困难,,,,我们采用drissoinpage进行自动化获取。首先进行抓包分析,,,随便找个主页,f12,关键词搜索,发现这个包是以post开头。请你第一次运行先按0,进行登录(或者触发反爬的时候),登录完成之后,按1进行爬取,完整代码请在知识星球。
手把手教你学simulink(8.3)--实例:基于 Simulink 的自动驾驶汽车速度控制系统设计与仿真
基于 Simulink 的自动驾驶汽车速度控制系统设计与仿真。
小卫星多普勒频偏MATLAB代码
多普勒频偏是由于发射机和接收机之间的相对运动而引起的频率变化。对于小卫星,由于其速度和高度的变化,多普勒频偏会变得更加明显。本文将探讨小卫星多普勒频偏的原理、影响因素以及补偿方法。多普勒频偏的原理当发射机和接收机之间存在相对运动时,接收到的信号频率会发生变化。这种频率变化称为多普勒频偏。其原理可以描述如下:设发射机和接收机之间的距离为 d,发射信号的频率为 f0,发射机和接收机的相对速度为 v。则接收到的信号频率 f 为:其中 c 为光速。
SAP-ABAP:SAP系统调优利器:RZ11动态参数修改全指南
SAP系统调优利器:RZ11动态参数修改全指南
jre9下载 jdk9
(Java SE Runtime Environment 9.0) 9.0u175 官方最新版 【x86|x64】
深度学习工具包 DeepLearningToolbox
深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[](https://bitdeli.com/free "Bitdeli Badge")
蓝牙模块HM-10手册
蓝牙模块HM-10手册,该手册对蓝牙模块HM-10进行了详细的介绍和使用方法以及一些AT指令。
android 蓝牙通讯demo
android 下蓝牙通讯demo,实现了发现蓝牙,使能蓝牙,通过蓝牙发送消息。
订阅专栏 解锁全文
113



被折叠的 条评论
为什么被折叠?



