C++ Primer 读书笔记

20 CVPR Learning 3D Semantic Scene Graphs From 3D Indoor Reconstructions 学习笔记 3RScan是大规模真实世界的室内场景,特点是对478个自然改变的室内环境在不同的时间帧进行了1482 RGB-D scans,每一个scene都包括了一些位置被改变的物体。它和ScanNet数据集的区别主要在于ScanNet中的每一个采样环境都不相同,但是3RScan中存在采样环境相同但物体的位置不同的场景。Scene Graph Annotations 则是在3RScan的基础上给物体加入了场景图需要的关系、物体特征和类别标注,同时对3RScan进行了扩展,以此形成了场景图数据。 阅读详情

C++ Primer 读书笔记

再详细读一遍C++ Primer

【ANSYS APDL】提取结构刚度矩阵完整过程--附Python代码实现 ANSYS的结构刚度矩阵提取中一些操作技巧 阅读详情

相关推荐

LVGL的基础知识总结

另外,还有自定义字库的使用,具体可参考开发手册。

qq_28576837的博客 7398

C++ Primer读书笔记

 C++ Primer读书笔记注:本文转自www.Eachfun.com         (整理说明:本资料是我在网上无意间找到的,读起来感觉不错,但由于原文是每章一个网页的格式,读起来不是很习惯,而且也不方便保存,所以我花了2个多小时的时间将所有网页的内容综合整理了一下,但最后才发现,文章的顺序颠倒了,所以各位如果愿意阅读本文的话,请从后面向前读,每个红色“标题”代表一章,如有不

方健的博客 2941

Halcon VariableInspect (变量检查拓展)安装指南

网址2;

T 969

c++ primer读书笔记

xx

onlyForCloud的专栏 472

深入解析AndroidManifest.xml与device_admin.xml:打造完美DeviceOwner应用配置

本文深入解析了Android企业级开发中DeviceOwner应用的核心配置文件AndroidManifest.xml与device_admin.xml。详细阐述了如何精准声明DeviceAdminReceiver、定义管理策略,并提供了通过ADB命令进行设置与验证的实战指南,帮助开发者构建权限完整、配置正确的设备所有者应用。

ice55的博客 682

Zipformer实战:5分钟快速搭建语音识别模型(附LibriSpeech测试结果)

本文提供了一份详细的Zipformer语音识别模型实战指南。通过清晰的步骤,指导读者在5分钟内完成从环境配置、LibriSpeech数据集准备到模型训练与测试的全过程。文章重点解析了关键配置参数,并分享了在LibriSpeech测试集上的性能结果,帮助开发者快速评估和应用这一高效的语音识别架构。

weixin_35578748的博客 165

C++ Primer第二章读书笔记

C++ Primer第二章读书笔记

CSDN_missing的博客 215

STM32 伺服电机 指令脉冲+方向位置控制模式 主从定时器 实现PWM脉冲数精确控制

实验室有个项目涉及到多个步进电机以及伺服电机的控制,需要电机得到一个触发信号后精确移动一段距离。 下面以单个伺服电机控制为例,利用伺服电机的指令脉冲加方向位置控制模式实现jing'que ...

phcdd的博客 2万+

C++ Primer 中文版 第5版 读书笔记

分离式编译如果想声明一个变量而非定义它,就在变量前添加关键字extern// 声明i,而非定义iint j;// 声明并定义j任何包含了显示初始化的声明即成为定义。我们能给由extern关键字标记的变量赋一个初始值,但是这么做也就抵消了extern的作用。extern// 定义变量能且只能被定义一次,但是可以多次声明标准库类型string表示可变长的字符序列// 列表初始化// 错误注意字符串字面值的结尾处还有一个空字符如前所述,switch的执行流程有可能会跨过某些case标签。

weixin_44623642的博客 1848

【报错】raise pickle.UnpicklingError(_get_wo_message(str(e))) from None_pickle.UnpicklingError: Weigh

File "/opt/conda/envs/py_3.12/lib/python3.12/site-packages/torch/serialization.py", line 1470, in load raise pickle.UnpicklingError(_get_wo_message(str(e))) from None _pickle.UnpicklingError: Weights only load failed.

静谧、淡雅 787

基于Matlab的无迹卡尔曼滤波惯性导航与DVL组合导航

航天航空领域中的惯性导航是一种基于惯性测量单元(Inertial Measurement Unit,IMU)的导航方法,可以提供航向、速度和位置等信息。深度/速度测量器(Doppler Velocity Log,DVL)是一种常用的传感器,可用于测量水下航行器的速度。通过将DVL与无迹卡尔曼滤波相结合,可以实现高精度的组合导航。本文介绍了基于Matlab的无迹卡尔曼滤波(UKF)惯性导航与DVL组合导航的方法。以上是一种简化的示例代码,您可以根据实际应用需求进行相应的修改和优化。

DevSavantX的博客 424

C++ primer读书笔记(一)

C++ primer读书笔记之第1章 前言 研究生开学也已经大半个月了,导师的方向是做C++开发。我这个苦逼的研究僧也只有跟着老师的项目学习C++。我之前也只有C语言和一小部分Java的基础,和大家一样对于C++的学习都是从零开始的。而且我的本科还不是计算机专业,是隔壁的通信专业,对于C++的学习仅限于24个学时的大学计算机基础。所以我们一起学习,共勉! 对于C++的初步认识 因为之前学过一段时间...

或许没有的博客 419

AMBA-CHI协议详解(十五)

Write transactions事务描述以及请求属性,cache line状态转换。

Crazzy_M的博客 654

《c++ primer》读书笔记7

笔记范围:2.4节

owlling的专栏 86

Statistics and Machine Learning Toolbox

Statistics and Machine Learning Toolbox(带书签),MATLAB统计学习工具

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

《c++ primer》读书笔记10

笔记范围:2.7节

owlling的专栏 96

IDEA的使用指南

IDEA基于java的使用手册,可以最快速的上手,在使用中不断的丰富自己的使用技巧.

《c++ primer》读书笔记9

笔记范围:2.6节

owlling的专栏 96

复分析 阿尔福斯(Ahlfors) 第三版答案 英文

答案分为十章,有部分习题没有答案,全英文复分析阿尔福斯(Ahlfors) 第三版答案

《c++ primer》读书笔记11

笔记范围:2.8节

owlling的专栏 95

《c++ primer》读书笔记3

笔记范围:1.3节到1.4节

owlling的专栏 94

《c++ primer》读书笔记 说明

关于本笔记的一些说明

owlling的专栏 95

《c++ primer》读书笔记8

笔记范围:2.5节

owlling的专栏 91

C++Primer读书笔记

1

qq_20832345的博客 181

《C++ Primer 中文版》第4版 读书笔记

《C++ Primer 中文版》第4版 读书笔记作者:    Stanley B.Lippman                  Josee Lajoie                BarBara E.Moo翻译:    李师贤 蒋爱军 梅晓勇 林瑛出版:    人民邮电出版社 2006.3书号:    ISBN 7-115-14554-7                T

ﺴ۩๑一棵树的程序历程๑۩ﺴ 1894

《C++ Primer 4th》读书笔记 序

注:本系列读书笔记是博主写作于两三年前的,所以是基于《C++ Primer》第四版的,目前该书已更新至第五版,第五版是基于C++11标准的,貌似更新挺多的。博主今年应届硕士毕业,如若过阵子能如愿找到一份Linux C/C++方面的工作,我会重读第五版,并对该系列读书笔记进行更新。另外,使用的作图工具是Minjet MindManager 2014。 第3章-标准库类型 第4章-数组和指针 ...

weixin_34221332的博客 113

CAN协议三类标准差异与数据帧深度解析

CAN协议并非单一标准,而是涵盖经典CAN、CAN FD和CAN XL的演进式通信规范体系。其核心原理在于基于CSMA/CD的竞争式总线仲裁机制,通过ID位优先级‘线与’实现无中心调度;技术价值体现在确定性通信、强抗干扰性及多节点容错能力;广泛应用于汽车电子ECU互联、工业PLC控制网络及电池管理系统(BMS)等实时场景。本文聚焦CAN协议种类辨析与数据帧结构解剖,深入剖析DLC字段歧义、EDL/BRS位作用、CRC分段校验机制及FTI帧类型标识等关键热词,揭示物理层兼容性陷阱与实操调试逻辑。

weixin_34232744的博客 260
下一篇: ListCtrl 颜色控制
skyremember
博客等级 码龄20年 204粉丝 484原创
评论 2
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值