【git】git: ‘interpret-trailers’ is not a git command. See ‘git --help’

cents 7.6系统. yum源安装git最新版本是1.8.3

报错:

git: 'interpret-trailers' is not a git command. See 'git --help'.
cannot insert change-id line in .git/COMMIT_EDITMSG

解决:

git add xxx
git commit -m "xxx
源码安装最新版本git 官网下载源码包来安装,最新源码包下载地址:https://git-scm.com/download Note: 不要用yum安装git, yum源安装git最新版本是1.8.3,该版本太老,之后用git commit 有可能会报错:git: ‘interpret-trailers’ is not a git command. See ‘git --help’. cannot insert change-id line in .git/COMMIT_EDITMSG 必须安装更新版本,比如git-2.12.2 阅读详情

相关推荐

大模型推理中Prefill与Decode、KV Cache三者说明

Prefill 阶段对输入 Prompt 并行编码,一次性构建KV Cache,属于计算密集型任务。Decode 阶段逐 token 迭代生成,复用KV Cache避免重复计算,属于显存带宽密集型任务。KV Cache是自回归推理的核心基石,用显存换时间,实现两阶段衔接与高效生成。PD 分离通过任务解耦、异构硬件、异步调度、独立批处理,解决传统一体化推理的资源冲突与利用率低下问题,是当前云端大模型推理服务的主流工程优化方向。

a486259的博客 1500

最短线性递推式求解与有理函数重建

这一算法来自于我们对“线性递推式拟合”的视角转换,其后得到的算法是自然的。 引理 1. 如果两个有理分式 p1/q1,p2/q2p_1/q_1, p_2/q_2p1​/q1​,p2​/q2​ 均有 deg⁡p<n,deg⁡q≤n\deg p<n, \deg q\leq ndegp<n,degq≤n 且展开式 p1/q1≡p2/q2(modx2n)p_1/q_1 \equiv p_2/q_2 \pmod {x^{2n}}p1​/q1​≡p2​/q2​(modx2n),那么 p1/q1=p2/

Entropy Increaser 的博客 2596

4路QSFP28接口能玩出什么花样?基于璞致VU13P开发板的100G网络测试方案

本文详细介绍了基于璞致PZ-VU13P-KFB开发板构建100G网络测试方案的实战指南。该方案充分利用板载Xilinx Virtex UltraScale+ FPGA的强大算力与4路QSFP28接口,涵盖从光模块选型、Aurora协议配置、开源Corundum方案部署,到误码率测试及散热优化的全链路流程,为高速网络设备研发与验证提供了可靠的硬件平台。

cola5的博客 457

详解各类以太网标准10BASE-T/100BASE-T4/100BASE-FX/1000BASE-X等

以太网是现实世界中最普遍的一种计算机网络。以太网有两类:第一类是经典以太网,第二类是交换式以太网,使用了一种称为交换机的设备连接不同的计算机。经典以太网是以太网的原始形式,运行速度从3-10 Mbps不等;而交换式以太网正是广泛应用的以太网,可运行在100Mbps、1000Mbps和10000Mbps高速率,分别以快速以太网、千兆以太网和万兆以太网的形式呈现

不积跬步,无以至千里! 5万+

PyRoki 入门教程(二)安装与使用

PyRoki是一个用于机器人运动学优化的Python库,具有模块化设计、可扩展性和跨平台支持等特点。它支持逆运动学、轨迹优化和动作重定位等任务,采用Levenberg-Marquardt优化器提高效率。主要功能包括:基于URDF的可微分正向运动学模型、自动生成碰撞基元、通用成本因子和自定义成本函数等。PyRoki支持CPU、GPU和TPU运行,适用于从单机器人到大规模并行处理场景。目前存在一些限制,如仅支持软约束、静态形状和特定关节类型等。官方提供了多个应用示例,包括基础逆运动学、碰撞检测、轨迹优化和手部/

机器人控制与仿真应用 1255

《UDS协议从入门到精通》系列——图解0x23:通过地址读取内存

如何读取ECU中指定内存地址的数据?图解UDS 0x23服务带你快速上手!!

车载系统攻城狮 2626

YOLOv11 改进 - 特征融合 | 小目标检测救星:DySample动态上采样减少特征丢失

本文介绍了超轻量且高效的动态上采样器DySample与YOLOv11的结合,以解决传统上采样器工作负载大、应用场景受限的问题。DySample从点采样角度构建上采样,绕过动态卷积,使用PyTorch标准内置函数实现,无需定制CUDA包,能大幅减少参数、FLOPs等资源消耗。我们将DySample代码集成进YOLOv11。实验脚本显示,结合DySample的YOLOv11在多个密集预测任务中或表现出色。

魔改工程师的博客 1425

vue项目表格甘特图开发

🧩 甘特图可以管理项目进度,生产进度等信息,管理者可以更直观的查看内容。

qq_35946021的博客 991

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

计算机控制技术及应用

《计算机控制技术及应用》通过总结作者的科研成果和吸收国内外的先进理论、方法和技术,以计算机控制系统的网络化、开放化、智能化和集成化发展趋势为主线索,主要介绍计算机控制系统的基本概念和计算机控制系统的典型形式,计算机控制系统的数学描述与基本分析方法,以及数字PID控制器、最少拍控制系统、达林算法、状态变量设计法等设计方法及其各种改进算法。重点突出计算机控制系统输入输出通道接口的设计方法和典型控制系统的设计案例与实现方法等。

上一篇: ffmpeg 音频相关命令
下一篇: 源码安装最新版本git
lcyw
lcyw 百度研发工程师 百度研发工程师 领域专家: C/C++技术领域 领域专家: C/C++技术领域
博客等级 码龄19年 3612粉丝 137原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

lcyw

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值